News

Image shows DeadHand jigs and fabrication tabs lying on a work surface
How to Prevent Dzus Tabs from Ending Up Crooked
Crooked Dzus tabs = skyrocketing frustration. Learn how to weld Dzus tabs for perfect alignment every time. Lire plus...
Image shows DeadHand Solutions jig on round tubing
Why Round Tubing Makes Tab Alignment a Pain & the Tools Fabricators Use to Fix It
Welding on round tubing can be a struggle. This guide explains common tab alignment issues and tools that help. Lire plus...
Welding in action with sparks flying
5 Ways to Speed Up Fabrication in the Shop Without Sacrificing Quality
Want to speed up fabrication without sacrificing quality? Learn 5 shop-tested ways to reduce rework, improve alignment, and build faster the right way. Lire plus...
Image shows two individuals working on a motorsports chassis
TIG vs MIG for Tab Welding: Which One Actually Makes Sense on a Motorsports Chassis?
TIG vs MIG welding for race car chassis tabs comes down to heat control, material, and setup. Learn when each process makes sense and what really matters. Lire plus...
Welding mistake
6 Welding Mistakes We Still See in Shops That Cost Fabricators Time
Grinding off welds gets old fast. We broke down 6 common welding mistakes that show up in shops all the time and what actually fixes them. Lire plus...
Jig made of high ASA filament
High-Heat ASA Filament: How Durable Is It Really? We Put It to the Test
ASA isn’t just “plastic.” It’s a high-heat, shop-proven material used in automotive and industrial applications, and it’s why our jigs work the way they do (really well!). Lire plus...
Different size jigs in plastic packaging splayed out on table
Which Jig Size Do You Need? How to Choose Based on Tubing Diameter & Use Case
Wondering which jig size you need? Here’s how to choose the right Chassis Speed Jig based on the tubing diameter and the kind of builds you’re doing. Lire plus...
Fabrication tools on table
Hands-Free Welding Solutions: Clamps, Magnets, Jigs (Which to Use and When)
Clamps. Magnets. Jigs. Check out this quick pros and cons breakdown of each hands-free welding method, and when each one makes sense in the shop. Lire plus...
Fabricator working on car
Top Fabrication Tips & Takeaways from PRI and the Motorsports Community
We're sharing our biggest fabrication takeaways and shop-level insights from PRI and the motorsports community. Lire plus...
Image of Dead Hand Solutions green colored jig
How to Weld Dzus Tabs on a Tube Chassis (Pro Shop Tips + Step-by-Step)
Dzus tabs look simple until they’re crooked, misaligned, and your panel won’t sit right. Here's a step-by-step guide on how to weld Dzus tabs on a tube chassis. Lire plus...
Person with gloves and protective gear TIG welding
Magnets and TIG Welding — Do They Really Mess with the Arc?
We broke down the myth vs. reality of magnets and TIG welding, when they cause issues, when they don’t, and how to use them right during fit-up and tacking. Lire plus...
Tack welding in progress with sparks flying
Tack Welding 101: How to Hold, Position & Tack Tabs for Cleaner Final Welds
Tack welding doesn’t get the glory, but it’s usually the reason things go sideways. Here’s a breakdown of how to hold and tack tabs properly. Lire plus...
Red speed jig on tube
How the Chassis Speed Jig Works
Get straighter, cleaner tab welds with the Chassis Speed Jig. Learn how it works and why fabricators use it for fast, repeatable alignment on round tubing. Lire plus...
How to Weld Quarter Turn Dzus Tabs onto Roll Cage Tubing
How to Weld Quarter Turn Dzus Tabs onto Roll Cage Tubing
Whether you're mounting aluminum body panels, interior tins, or custom access doors, Dzus tabs are a racecar fabricator’s best friend. They're small, lightweight, and when installed properly, allow for fast... Lire plus...